YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD.
Type: Cold Stamping, Stator And Rotor
Mould: Multistep Progressive Dies
Surface Processing: Polishing
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm, 0.02mm
Material: Silicon Steel
Place Of Origin: China
Machine Capabilities: 16 To 300 Ton
Concentricity: Min 0.03
Range Of Application: Servo Motor
Packaging: Wooden box
Place of Origin: China
Port: Ningbo Port,Shanghai Port
When starting the fuse or thermal relay disconnect; check the fuse capacity is appropriate, suitable for fuse fuse fuse to try again, such as inspection, the transmission part is too large or too tight load, the circuit has no short circuit, and the motor itself is short circuit or grounding, grounding fault, (1) to use insulation megger motor winding, when the insulation resistance is lower than 0.2M, indicating a serious winding damp, should be dried, such as zero resistance that the ground. Winding grounding often occurs at the outlet of the motor, the power line enters the line empty, or the winding extends out of the notch. For the latter case, bamboo or insulation paper can be inserted between the stator core and winding, and coated with insulating paint to be dried, and the qualified inspection can be used. (2) short circuit fault, the measurement of any two phases of insulation with a multimeter or multimeter, such as below 0.2M or close to zero to explain the interphase short-circuit, measured the current of the three windings, and the phase of large current is short circuit phase.
The Principal Activities of Yuanzhong
Custom metal stamping and stator and rotor lamination to serve the global market.
| Product Name || stator and rotor stack |
| Material || |
B50A600 (Or Designated material)
| Servo Motor |
| stator and rotor lamination |
|Packing||Wooden box(Can be customized)|
| Standard || IS09001; 2008 |
2. Produce show
Please send us your drawings or samples.
4. Company profile
YUYAO YUANZHONG SALT PIECES CO.LTD, The factory is specializing in producing kinds of motor iron core and motor punching plate.
The existing equipment including Japan AIDA200T,AIDA125T and Taiwan INGYU80T, in all
8 high speed precise punches, also with the equipment of Slitting Ling, precision surface grinder and so on. In addition, the company is also equipped with more than 40 ordinary lathes with the capacity from 5 to 10 tons. We normally produce motor iron core about 80 thousand per months.
The company in 2001 has passed the IS09001; 2000 standard quality system certification. And take this as an opportunity to carry out the implementation carefully, complete control of product quality to satisfy customers.
5. Production process
(1)Accurate to 0.01mm, the deviation is not exceeding 0.02mm
(2)Manual Inspection and Measuring Profile Projectors
(3)ISO 9001:2008 certificate
Packing Details : customize appropriate wooden case according to product size and weight
Desiccant + Water Proof Cloth + PP + Solid Carton
9. Contact us
Product Categories : Servo Motor Iron Core
Copyright © 2019 YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD. All rights reserved.