YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD.
Type: Cold Stamping, Stator And Rotor
Mould: Multistep Progressive Dies
Surface Processing: Polishing
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm, 0.02mm
Material: Silicon Steel
Place Of Origin: China
Machine Capabilities: 16 To 300 Ton
Concentricity: Min 0.03
Range Of Application: Custom Stator Lamination
Packaging: Wooden box
Place of Origin: China
Port: Ningbo Port,Shanghai Port
The magnetic resistance of the magnetic circuit should be changed as much as possible when the rotor rotates.
Therefore, the fixed and rotor of the motor are double convex, and are made of silicon steel sheet.
In each stator magnetic pole, there is a simple concentrated winding, and the winding of the two stator poles relative to the radial poles is formed in series or parallel.
There are no windings or permanent magnets on the rotor.
According to the phase of the motor, it can be divided into odd and even phases.
According to the magnetic circuit structure of the motor, it can be divided into two - type long - length magnetic circuit and four - pole type short - magnetic circuit.
According to the electric excitation mode of the motor, there are single phase excitation and polyphase excitation
The Principal Activities of Yuanzhong
Custom Metal Stamping and stator and rotor lamination to serve the global market.
Custom Stator lamination
| Product Name || stator and rotor stack |
| Material || |
B50A600 (Or Designated material)
| stator and rotor lamination |
|Packing||Wooden box(Can be customized)|
| Standard || IS09001; 2008 |
2. Produce show
Please send us drawings or samples.
4. Company profile
YUYAO YUANZHONG MOTOR PUNCHING CO.LTD, The factory is specializing in producing kinds of motor iron core and motor punching plate.
The existing equipment including Japan AIDA200T,AIDA125T and Taiwan INGYU80T, in all 8 high speed precise punches, also with the equipment of Slitting Ling, precision surface grinder and so on. In addition, the company is also equipped with more than 40 ordinary lathes with the capacity from 5 to 10 tons. We normally produce motor iron core about 80 thousand per months.
The company in 2008 has passed the IS09001; 2008 standard quality system certification. And take this as an opportunity to carry out the implementation carefully, complete control of product quality to satisfy customers.
5. Production process
(1)Accurate to 0.01mm, the deviation is not exceeding 0.02mm
(2)Manual Inspection and Measuring Profile Projectors
(3)ISO 9001:2008 certificate
Packing Details : customize appropriate wooden case according to product size and weight
Desiccant + Water Proof Cloth + PP + Solid Carton
9. Contact us
Product Categories : Reluctance Motor Lamination
Copyright © 2020 YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD. All rights reserved.