YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD.
Type: Cold Stamping, Stator And Rotor
Mould: Multistep Progressive Dies
Surface Processing: Polishing
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm, 0.02mm
Material: Silicon Steel
Place Of Origin: China
Machine Capabilities: 16 To 300 Ton
Concentricity: Min 0.03
Range Of Application: Plastic Seal Motor
Packaging: Wooden box
Place of Origin: China
Port: Ningbo Port,Shanghai Port
The stator winding of the plastic motor is a ring-shaped spiral tube, and the computer-controlled toroidal Motor Stator winding machine and special fixture are used to straighten the enameled wire directly on the semicircular stator core. Winding speed of up to 2500rpm, it requires enameled wire quality and stability, the line of plasticity, strength, film firmness and so on under the action of the rolling force shall not be destroyed; line arrangement should be closely uniform, so as to avoid inter-turn short circuit or ground breakdown ; Around the good line spell into the whole circle, the coil and the main winding between the wiring to be correct; line between the connections are required to put on the insulation paint tube and bandage firmly to prevent being pulled off.
The Principal Activities of Yuanzhong
Custom Metal Stamping and stator and rotor lamination to serve the global market.
| Product Name || stator and rotor stack |
| Material || |
B50A4700 (Or Designated material)
| Plastic seal motor |
| stator and rotor lamination |
|Packing||Wooden box(Can be customized)|
| Standard || IS09001; 2008 |
2. Produce show
| Type || Materials || Main Function |
Plastic seal Motor Core
| Plastic seal motor core |
4. Company profile
YUYAO YUANZHONG SALT PIECES CO.LTD, The factory is specializing in producing kinds of motor iron core and motor punching plate.
The existing equipment including Japan AIDA200T,AIDA125T and Taiwan INGYU80T, in all
8 high speed precise punches, also with the equipment of Slitting Ling, precision surface grinder and so on. In addition, the company is also equipped with more than 40 ordinary lathes with the capacity from 5 to 10 tons. We normally produce motor iron core about 80 thousand per months.
The company in 2001 has passed the IS09001; 2000 standard quality system certification. And take this as an opportunity to carry out the implementation carefully, complete control of product quality to satisfy customers.
5. Production process
(1)Accurate to 0.01mm, the deviation is not exceeding 0.02mm
(2)Manual Inspection and Measuring Profile Projectors
(3)ISO 9001:2008 certificate
Packing Details : customize appropriate wooden case according to product size and weight
Desiccant + Water Proof Cloth + PP + Solid Carton
9. Contact us
Product Categories : Plastic Seal Motor Core
Copyright © 2019 YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD. All rights reserved.